UV Curing Resins Market - Industry Analysis, Market Size, Share, Trends, Growth And Forecast 2020 - 2025
UV Curing Resins Market Overview
UV Curing Resins Market size is forecast to reach $7.63 billion by 2025 after growing at a CAGR of 10% during 2020-2025. Ultraviolet (UV) curing resins are photochemical products in which ultraviolet light is used to dry or cure coatings, inks, or adhesives instantly. The growth of the market of UV curing resins is expected to be driven by the high demand from the packaging industry.
The report: “UV Curing Resins Market-Forecast (2020-2025)”, by IndustryARC, covers an in-depth analysis of the following segments of UV curing resins industry.
By Resin Type: Acrylated Epoxies, Acrylated Polyesters, Acrylated Urethanes, Acrylated Silicones, and Others.
By Formulation: Oligomers, Monomers, Photoinitiators, Additives, and Others.
By Application: Adhesives and Sealants, Masking Materials, Printing Inks, Coated Gaskets, Graphic Arts, concrete and plastic coatings, Flexographic printing, and Others
By End Use: Automotive, Packaging, Electronics, Coating Industry, and Others.
By Geography: North America, South America, Europe, APAC, and RoW.
- Asia-Pacific dominates the UV curing resins market owing to increasing demand from coatings and adhesives industry.
- Increasing demand for UV curable inks is also one among the driving factor for growth of UV cured resins market in the forecast period.
- High setting up cost of the UV curable resins manufacturing plant will hinder the growth of the market in the forecast period.
- COVID-19 pandemic has impacted the global chemical industry due to complete or partial shutdown to avoid spread of coronavirus, this is hampering the growth of UV curing resins market in 2020.
By Resin Type-Segment Analysis
Acrylated Epoxies held the largest share in the UV curing resins market in 2019. Acrylated Epoxies are very popular UV curing systems. They undergo fast radical induced crosslinking when exposed to UV radiation. They are extensively used in lithographic inks and varnishes, as well as in printed circuit board, wood, concrete and plastic coatings. They have well all round properties combined with fast cure rates and exceptional adhesion performance due to the presence of polar hydroxyl and ether groups in the epoxy backbone structure. They also have outstanding corrosion resistance. Acrylated Polyesters has second largest share in the UV curing resins market. Acrylated polyesters are produced in a wide range of relativities and viscosities and are mainly used in printing inks, wood and paper coatings. They are very attractive resin systems due to their relative low cost and due to the large number of esters available which allows for a wide variation of properties. This class of UV curing resins has often reasonable all-around performance but only average properties when compared to the other resin systems. They are typically lower in viscosity than epoxy resins and more versatile because they are more compatible with other prepolymers and therefore can be used in a larger variety of formulations.
By Formulation-Segment Analysis
Oligomers held the largest share in the UV curing resins market in 2019 based on formulation. Oligomers are used to formulate adhesives, inks, coatings, and a variety of other products. In addition to their ability to undergo free radical polymerization, these versatile oligomers are the most significant contributor to the physical performance characteristics of the product including flexibility, chemical resistance, hardness, adhesion, and more. Monomers has second largest share in the UV curing resins market. Free radical curing compositions are the most versatile curing systems in regard to product properties of monomers. However, only a limited number of monomers are available for light induced cationic UV curing Resins. These factor will drive the growth of the market in the forecast period.
By Application-Segment Analysis
Flexographic printing held the largest share in the UV curing resins market in 2019. UV curing resins are photochemical products in which ultraviolet light is used to dry or cure inks. UV curing resins are often the best choice when fast drying and curing is needed. They have become very popular resin systems due to their high productivity, ease of application, and low impact on the environment. The flexographic process can be used to print on paper, plastics, cellophane, metal and other materials. This growth can be attributed to its ability to print images that are superior in quality and to withstand extreme weather. Mounting commercialization of flexible packaging owing to its widespread application across various consumer items will directly propel the flexographic printing size over the projected period. Food packaging industry in Asia Pacific has shown a surge of 30% in the recent years. Packaging is extensively used in cosmetics, food & beverages, pharmaceuticals and personal care products. It is a key marketing tool that fuels the purchasing decision of the customer. It increases the aesthetic appearance, offers product differentiation and also enhances the company’s brand image. Moreover, strong growth in these aforementioned industries, particularly due to improved consumer spending will eventually drive the growth of the market in the forecast period.
By End Use-Segment Analysis
Automotive sector is the primary market of UV curing resins in 2019 growing at CAGR of 11%. UV curing resins are resistant to heat and corrosion and they are crucial to the automotive industry. It is expected that the amount of UV curing resins used in the production of automobiles will double in the next 15 years. According to International Organization of Motor Vehicle Manufacturers the total production of automobile (commercial as well as Personal) globally in the year 2019 was 91,786,861 units compare to 96,869,020 units in 2018 while in Asia-Pacific in the year 2018 was 52,449,078 units compare to 53,395,211 units in 2017. The increase in the global automobile production is a major factor leading to the growth of UV curing resins in terms of volume across the globe. The coronavirus pandemic has had far-reaching consequences beyond the spread of the disease and efforts to quarantine it. As the pandemic has spread around the globe, concerns have shifted from supply-side manufacturing issues to decreased business. The current epidemic outbreak has deeply influenced consumers' daily life and in addition to the impact on automotive sector. South Korea, Italy and Japan are the most affected among the major industrialized economies. Consequently, 80 percent of automotive and related companies report that Coronavirus will have a direct impact on their 2020 revenues. 78 percent of companies do not have enough staff to run a full production line. More than 80 percent of the world’s auto supply chain is connected to China. In January 2020 China’s car sales plunged by 18 percent. The China Passenger Car Association (CPCA) considers that the first two-month sales could decline by 40 percent or more compared to the same period in 2019. Production shortfalls resulting from supply chain disruptions in China will impact global automakers. This factor will hamper the growth of market for the year 2020. After the situation become normal it will grow with a steady rate in the forecast period.
APAC dominates the UV curing resins market with a share of 38% followed by North America and Europe. The economy of APAC is mainly influenced by the economic dynamics of countries such as China and India, but with growing foreign direct investment for economic development of South East Asia, the current scenario is changing. Countries in South East Asia are witnessing high growth and it is expected to be the most promising market during the forecasted period. The strong manufacturing industry of coatings, inks and adhesives which are expected to be the major target segments of UV cured resins. Currently, the penetration of UV cured resins is increasing in coatings and inks manufacturing segment at a very high pace around the globe. The key drivers for Asia Pacific region are expected to be the rising demand for green coatings, growing electronics manufacturing and increased use of environment-friendly inks in packaging applications. Moreover, growing technological dominance in these industries is increasing the use of UV cured resins as an adhesive. This factor will drive the growth of the market in the forecast period.
Drivers-UV Curing Resins Market
- Increasing use of environment-friendly industrial coatings will drive the growth of market
One of the main drivers identified in the UV curable resins market is the increasing use of environment-friendly industrial coatings. It is seen that traditional coatings contain hydrocarbon solvents, which upon curing release hydrocarbons in the atmosphere. However, these hydrocarbons have VOCs, which is carcinogenic and cause health problems. This has resulted in the government making stringent norms for controlling the release of VOCs in the environment. UV curable products do not have much negative impact on the environment, unlike conventional products. The UV curable coatings, with electron beam are emerging as the viable alternatives to traditional coating due to zero emissions. This prompt industries are using UV cured resins which are greener alternatives to conventional products. Hence, the increasing use of environment-friendly industrial coatings will drive the growth of the market in the forecast period.
- The increased use of UV curing resins in 3D printing will drive the growth of the market
The major factor for the growth of UV curable resins market is the increased use of these resins in 3D printing. 3D printing is emerging as a major manufacturing technology with immense potential. The 3D printing process is executed in many industries and uses UV curable inks, for example, in the electronics industry, these inks are highly used because of their properties of wear-resistance, robustness, and flexibility. Countries such as China, U.S., Korea, and Japan are using this technology for different applications. This increasing use of 3D printing is in turn propelling the consumption of UV curing resins globally. This factor will drive the growth of market in forecast period.
Challenges- UV Curing Resins Market
- High setting up cost of UV curing resins manufacturing plant will hamper the growth of the market
High setting up cost of the UV curable resins manufacturing plant has been identified as a major restraint in the UV curable resins market. It is seen that the initial cost of formulating an equipment can be higher than the cost incurred on conventional coating technologies. Also, the UV curing machine is costlier than the conventional one. The intensity of this challenge is especially higher in Asian countries, as they are more cost-sensitive. Hence, high setting-up cost of these manufacturing plants hampers the UV curable resins market growth. This factor will hamper the growth of the market in forecast period.
- Short shelf life of UV curing resins will hinder the growth of market
The shelf life of UV curing resins is only 6 months. Moreover, the cast layers should not exceed 3 to 4 mm. After that, several layers should be cast for safety reasons. UV curing resins is somewhat more expensive than conventional epoxy resin. A special UV lamp is required for curing of these resins. The UV radiation of the sun is only partly sufficient in the latitudes. These factors will hinder the growth of the market in the forecast period.
Technology launches, acquisitions and R&D activities are key strategies adopted by players in the UV curing resins market. In 2019 the market of UV curing resins has been consolidated by the top five players accounting for xx% of the share. Major players in the UV curing resins market are Arkema S.A., BASF SE, Covestro AG, Dymax Corporation, DIC Corporation, and Others.
Acquisitions/Technology Launches /Product launches
- In July 2019, Arkema acquired Lambson, a company which has specialization in Photoinitiators for UV curing resins in order to meet the demands of electronics markets, digital ink market, composites market, 3D printing market, and high-performance coatings market.
- In May 2019, Sun Chemicals, a DIC company introduced SunWave Lumina, a new range of high performance product of UV LED curing sheetfed offset inks for use in commercial printing.
- In March 2019, Allnex launched EBECRYL 898, a solvent-free UV curable binder in order to help in achieving substrate-specific end properties on wood, plastics & papers foil substrates, and resilient flooring.
1. UV Curing Resins Market- Market Overview
1.1 Definitions and Scope
2. UV Curing Resins Market - Executive Summary
2.1 Market Revenue, Market Size and Key Trends by Company
2.2 Key Trends by Resin Type
2.3 Key Trends by Formulation
2.4 Key Trends by Application
2.5 Key Trends by End Use
2.6 Key Trends by Geography
3. UV Curing Resins Market - Landscape
3.1 Comparative analysis
3.1.1 Market Share Analysis- Top Companies
3.1.2 Product Benchmarking- Top Companies
3.1.3 Top 5 Financials Analysis
3.1.4 Patent Analysis- Top Companies
3.1.5 Pricing Analysis
4. UV Curing Resins Market - Startup companies Scenario Premium Premium
4.1 Top startup company Analysis by
4.1.3 Market Shares
4.1.4 Market Size and Application Analysis
4.1.5 Venture Capital and Funding Scenario
5. UV Curing Resins Market -Industry Market Entry Scenario Premium Premium
5.1 Regulatory Framework Overview
5.2 New Business and Ease of Doing business index
5.3 Case studies of successful ventures
5.4 Customer Analysis - Top companies
6. UV Curing Resins Market - Market Forces
6.1 Market Drivers
6.2 Market Constraints
6.3 Market Opportunities
6.4 Porters five force model
6.4.1 Bargaining power of suppliers
6.4.2 Bargaining powers of customers
6.4.3 Threat of new entrants
6.4.4 Rivalry among existing players
6.4.5 Threat of substitutes
7. UV Curing Resins Market -Strategic analysis
7.1 Value chain analysis
7.2 Opportunities analysis
7.3 Product life cycle
7.4 Suppliers and distributors
8. UV Curing Resins Market – By Resins Type (Market Size -$Million)
8.1 Acrylated Epoxies
8.2 Acrylated Polyesters
8.3 Acrylated Urethanes
8.4 Acrylated Silicone
9. UV Curing Resins Market – By Formulation (Market Size -$Million)
10. UV Curing Resins Market – By Application (Market Size -$Million)
10.1 Adhesives and sealants
10.2 Masking Materials
10.3 Printing Inks
10.4 Coated Gaskets
10.5 Graphic Arts
10.6 Concrete and Plastic Coatings
10.7 Flexographic Printing
11. UV Curing Resins Market - By End Use (Market Size -$Million)
11.4 Coating Industry
12. UV Curing Resins Market - By Geography (Market Size -$Million)
12.1 North America
12.2 South America
12.2.5 Rest of South America
12.3.9 Rest of Europe
12.4 Asia Pacific
12.4.4 South Korea
12.4.5 Australia and New Zealand
12.4.6 Rest of Asia Pacific
12.5.1 Middle East
188.8.131.52 Saudi Arabia
184.108.40.206 Rest of Middle East
220.127.116.11 South Africa
18.104.22.168 Rest of Africa
13. UV Curing Resins Market - Entropy
13.1 New Product Launches
13.2 M&A’s, Collaborations, JVs and Partnerships
14. Market Share Analysis Premium
14.1 Market Share by Country- Top companies
14.2 Market Share by Region- Top companies
14.3 Market Share by type of Product / Product category- Top companies
14.4 Market Share at global level- Top companies
14.5 Best Practices for companies
15. UV Curing Resins Market -List of Key Companies by Country Premium
16. UV Curing Resins Market Company Analysis
16.1 Market Share, Company Revenue, Products, M&A, Developments
16.2 Company 1
16.3 Company 2
16.4 Company 3
16.5 Company 4
16.6 Company 5
16.7 Company 6
16.8 Company 7
16.9 Company 8
16.10 Company 9
16.11 Company 10 and more
"*Financials would be provided on a best efforts basis for private companies"